๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Anyone else cpu at 90 percent plus after 1.2.5? โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by Alledegly_noderunner ยท 4mo ago ยท 2a323a0ad8734e73
Page 1 of 2
[ 1 ] Next >
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Alledegly_noderunner #1 โ
โ 2a323a0ad8734e73 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Both my nodes are using almost max cpu? mem is fine, maybe 160 connections. Nothing else
seems wrong just that.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ welo #2 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
cpu usage seems to be proportional to total connections in my experience so the 160
connections probably isn't helping, however the latest update did "Significantly improved
transport logic for path request and announce handling", so that probably added extra
overhead. If that extra overhead is from a bug or just normal functionality is hard to
tell. My own node (which is a transport node) is perfectly fine but I don't have any
public backbone interfaces on it so it might just be a connections thing
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ aetherlab #3 โ
โ 509723a0ccb60610 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
On rns.sofia with Backbone TCP I have a median of 4.7% RNSD CPU load with 4h57min uptime
since update.
The machine is very calm and runs cool. :)
โ 1 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-4
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Alledegly_noderunner #4 โ
โ 2a323a0ad8734e73 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Yea its strange, got an email about cpu usage while i was asleep, checked it when i saw
the message hours later and cpu was still at 90+ percent. restarted the container and it
was still going high. checked my other vps and it was the same, rebooted that one and
still high. have left them both for a couple of hours and the first one has now gone back
to normal. maybe its stamps after reboot or once the announce rate limit kicks in for the
majority of traffic it chills out? im just guessing.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-5
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #5 โ
โ 8dd57a7382268096 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Also seeing only around 10-20% CPU load on a very small single-core VM with around
400 clients on BackboneInterface listener.
Are you seeing anything in the logs? Need to know a bit more about your setup to figure
this one out. Are you using backbone or TCPServer interfaces? What OS?
What version were you on before updating to 1.2.5? If it was significantly older, there
could be a lot of initial cleanup running on old cached data. The handling of this was
improved significantly recently, but if it had 100k+ cached destinations and announces
(as some long-running nodes would have), the initial restructuring and cleanup could take
quite a bit of time on very slow machines/VMs. A lot of that work is I/O bound, and
especially on cheap VMs, I/O throughput can be quite bad. If you're then also running
a container inside the VM, the throughput just tanks even further. That could
explain what you were seeing, but hard to guess exactly without further info. What are
the specs and setup roughly of how you're running it? Container inside hosted VM?
Do you have interface discovery broadcasts enabled? If you do, you will see CPU spikes
just as the node starts up and computes discovery broadcast stamps for your interfaces
with discovery enabled, but depending on target stamp value, that should subside within a
few seconds to a minute or so. If you do have it enabled, what LXMF version is installed?
Are they both back to normal now?
If they're still doing it, try kicking the loglevel up to debug, and observe live as it
starts up, there's probably a hint in there.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-6
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #6 โ
โ 8dd57a7382268096 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Also, CPU usage shouldn't really significantly affected by having many connections,
unless they of course are doing something. Unless you're using TCPServerInterface -
don't do that for large public nodes, Backbone is much more efficient; only uses one
thread and super fast EPOLL I/O no matter how many connections you have.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-7
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ K8 #7 โ
โ a361065d039738f6 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
My big public node also seems fine, the pattern of CPU usage looks pretty similar from
before I updated to 1.2.5. Sometimes a single core will get maxed out when someone is
transferring a lot of data, and LXMF will spike all of the cores when generating
propagation peering stamps (actually all of the cores minus 1, but that's a custom patch
I deploy on my node to make things run more smoothly).
โ 1 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-8
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #8 โ
โ 8dd57a7382268096 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Yeah, I really should make the core count configurable there :)
โ 1 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-9
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Alledegly_noderunner #9 โ
โ 2a323a0ad8734e73 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Second VPS was pinned for a few more hours but is back to normal now. I dont think i
would have noticed unless my provider sent that email about cpu useage, everything was
responding fine. It has to be above 80 percent for an hour to trigger a notification via
email. 1.2.4 to 1.2.5, i built them both from scripts i pull in from git so in theory
they are identcal. I have another node on an OpenWRT which can handle 500 or so
connections without any sort of drama on 1.2.4. Watched it very closely for a few weeks
before standing up the vps. it lived through the RU CGNAT drama like a champ. Will look
through the logs today and see if i can see any offenders, I know that as soon as I
opened a port that was not discoverable i got a connection attempt from Alibaba servers
in the US so not sure whats going on.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-10
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Alledegly_noderunner #10 โ
โ 2a323a0ad8734e73 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
Yea i would say they in a vm, KVM or something Intel, Ubuntu 24.04 LTS, headless and then
one docker container. I want to try Armbian on some new hardware to replace my OpenWRT
one node, then im hoping to pull in the same script as the VPS. Im pretty new to using
VPS but im getting there.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
[ 1 ] Next >
Page 1 of 2
โ INFO โ Identify to this node to post. How?
bottom